How Is the Blower Motor Resistor Installed on 2008 Dodge Magnum?

Installation of the blower motor resistor requires that it be installed in the HVAC housing and screwed into place using two screws with tightening force of 2 Nm (17 in. lbs.). Connect the resistor to the wire harness, by locking the tab. Lastly, install the glove box once again and reconnect the negative battery cable.

OEM 2008 Dodge Magnum Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
2008 Dodge Magnum Blower Motor Resistor, Rear Part Number: 68379071AA
$124.65 MSRP: $185.00
You Save: $60.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control Module, Front & Rear.; Control Module; Fan Resistor; Module; Resistor; Module Power Blower Motor
- Position: Rear
- Replaces: 68079480AA, 68110616AB, 68029736AA, 68433698AA, 68110616AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.3 x 4.3 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68379071AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Magnum Control Module, Front Part Number: 68317103AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.2 x 5.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68317103AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Magnum Resistor Part Number: 68037310AB
$23.10 MSRP: $34.25
You Save: $11.15 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Replaces: 68037310AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 4.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68037310AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Magnum Blower Motor Resistor Parts and Q&A

Q: How Is the Blower Motor Resistor Installed on 2008 Dodge Magnum?
A: Installation of the blower motor resistor requires that it be installed in the HVAC housing and screwed into place using two screws with tightening force of 2 Nm (17 in. lbs.). Connect the resistor to the wire harness, by locking the tab. Lastly, install the glove box once again and reconnect the negative battery cable.