How to Service a Blower Motor Resistor on Dodge Magnum?

Before handling the blower motor resistor, you should first cut the negative side of the battery, wait one minute and then wait another minute for the capacitor to empty. You should allow the blower motor resistors to cool for five minutes after turning the motor on, as high operation can warm them up considerably. Working the blower motor without the resistor can damage your vehicle. Disconnect the negative battery cable in the first step and then get the glove box out of the instrument panel. Pull the wire harness connector locking tab open and unplug the wire harness connector from the blower motor resistor. Unscrew the two screws attaching the blower motor resistor to the HVAC housing and pull out the resistor. Set the blower motor resistor into the HVAC housing, screw it in with the two screws and tighten them to 2 N.m (17 in.lbs.). Fit the end of the wire harness back into the blower motor resistor and then snap the locking tab into place. Afterwards, put the glove box back in and attach the negative battery cable.

How to Maintain a Blower Motor Resistor on Dodge Magnum?

To access the blower motor resistor in vehicles with an air bag system, remove the negative battery cable, then wait two minutes for the air bag system capacitor to drain. Allow the blower motor to be off for at least five minutes after you used the car, so the resistor has time to cool off. Don't operate the heater's blower with the resistor disconnected because it could damage the car. The glove box is the first item you should take out from the instrument panel. After that, push the wire harness connector locking tab and remove the connector from the blower motor resistor. The last part is to secure the blower motor resistor to the HVAC housing by removing the two screws and taking the resistor out.

OEM Dodge Magnum Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blower Motor Resistors found

View related parts
Dodge Magnum Blower Motor Resistor, Rear Part Number: 68379071AA
$124.65 MSRP: $185.00
You Save: $60.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control Module, Front & Rear.; Control Module; Fan Resistor; Module; Resistor; Module Power Blower Motor
- Position: Rear
- Replaces: 68079480AA, 68110616AB, 68029736AA, 68433698AA, 68110616AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Control Module, Front Part Number: 68317103AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Resistor Part Number: 68037310AB
$23.10 MSRP: $34.25
You Save: $11.15 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Replaces: 68037310AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Resistor Part Number: 5061094AB
$18.88 MSRP: $24.30
You Save: $5.42 (23%)
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Magnum Blower Motor Resistor

Choose OEM Blower Motor Resistor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Blower Motor Resistor follows strict manufacturing steps to lock in quality and fit. If your Dodge Magnum matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Magnum parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Magnum cars utilize the Blower Motor Resistor to regulate the blower motor speed and this component is very important in the car. This component has the primary function of circulating either hot or cool air within the cabin thus maintaining passengers comfort during their travel. There is blower motor resistor in Dodge Magnum models through which the flow of air is regulated in order so that the occupants of the car can manage the climate control system as per their convenience. As to the type or style which Dodge Magnum vehicles use for their Blower Motor Resistor, there is no mention of it although their operation remains basically the same: namely, the management of the air blowing. In totality, the Blower Motor Resistor is crucial for creating comfortable driving environment in the Dodge Magnum.

Dodge Magnum Blower Motor Resistor Parts and Q&A

Control Module, Front
68317103AA
Q: How to Service a Blower Motor Resistor on Dodge Magnum?
A:
Before handling the blower motor resistor, you should first cut the negative side of the battery, wait one minute and then wait another minute for the capacitor to empty. You should allow the blower motor resistors to cool for five minutes after turning the motor on, as high operation can warm them up considerably. Working the blower motor without the resistor can damage your vehicle. Disconnect the negative Battery Cable in the first step and then get the Glove Box out of the instrument panel. Pull the wire harness connector locking tab open and unplug the wire harness connector from the blower motor resistor. Unscrew the two screws attaching the blower motor resistor to the HVAC housing and pull out the resistor. Set the blower motor resistor into the HVAC housing, screw it in with the two screws and tighten them to 2 N.m (17 in.lbs.). Fit the end of the wire harness back into the blower motor resistor and then snap the locking tab into place. Afterwards, put the glove box back in and attach the negative battery cable.
Resistor
5061094AB
Q: How to Maintain a Blower Motor Resistor on Dodge Magnum?
A:
To access the Blower Motor resistor in vehicles with an air bag system, remove the negative Battery Cable, then wait two minutes for the air bag system capacitor to drain. Allow the blower motor to be off for at least five minutes after you used the car, so the resistor has time to cool off. Don't operate the heater's blower with the resistor disconnected because it could damage the car. The Glove Box is the first item you should take out from the instrument panel. After that, push the wire harness connector locking tab and remove the connector from the blower motor resistor. The last part is to secure the blower motor resistor to the HVAC housing by removing the two screws and taking the resistor out.