How to Service and Repair a Brake Light Switch on 2008 Dodge Magnum?

To service brake light switch, depress the brake pedal and remove the stop lamp switch from its bracket by rotating it counterclockwise about 30 degrees. Pull the switch back to separate it then remove the wiring harness connector from the switch.

OEM 2008 Dodge Magnum Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Dodge Magnum Brake Switch Part Number: 4671336AD
$39.68 MSRP: $53.75
You Save: $14.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Magnum Brake Light Switch Parts and Q&A

Q: How to Service and Repair a Brake Light Switch on 2008 Dodge Magnum?
A: To service brake light switch, depress the brake pedal and remove the stop lamp switch from its bracket by rotating it counterclockwise about 30 degrees. Pull the switch back to separate it then remove the wiring harness connector from the switch.