Other Name: Airbag - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module
Position: Upper Passenger Side
Replaces: 52030027AC, 52030027AB, 52030027AA
Condition: New
Fitment Type: Direct Replacement
SKU: 52030027AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
2008 Dodge Magnum Air Bag Parts and Q&A
Q: How to Install an Air Bag for Drivers on 2008 Dodge Magnum?
A: Begin by checking that the driver air bag trim cover is available for use by itself; if the horn switch is malfunctioning or the cover is damaged, move the air bag cushion to a new cover. When an air bag is found to be defective, you must replace the air bag and trim cover as a whole assembly unit. Fix the driver air bag to the steering wheel, next attach the air bag squib cables as well as the horn connector and lastly mount the air bag onto the steering wheel. For the next part, insert the little screws for the driver air bag into the bag and from behind the steering wheel, tighten the air bag to 10 Nm (89 in. lbs.). Ensure you do not begin to connect the battery's negative cable until after the system test, to avoid danger to yourself.