How to Maintain and Fix the Spoiler on 2008 Dodge Magnum?

Before servicing the spoiler on the 300/300C, remove the negative battery cable from its connection. Next up, take off the upper trim panel of the lift gate. Loosen the circles at both the rear washer fluid supply hose and the Chmsl wire harness connector. Unscrew the nuts fastening the rear spoiler to the liftgate, then take the spoiler away somewhat so the wire harness and washer fluid supply hose are visible. Eliminate the rubber grommet from the liftgate top on the right and after passing the wire harness and washer hose through the liftgate opening, remove the spoiler from the back of the car.

OEM 2008 Dodge Magnum Spoiler

Spoiler Wing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Spoiler found

View related parts
2008 Dodge Magnum Spoiler, Rear Part Number: WZ11RXFAI
Product Specifications
- Other Name: Spoiler - Liftgate; Spoiler, Rear; Spoiler Liftgate Magnum
- Position: Rear
- Replaces: 1BB27CDMAB, 1BB27DBMAB, 1BB27CDMAA, 1BB27WS2AB, 1BB27AXRAA, 1BB27DA4AA, 68020950AA, 1BB27DA4AB, 1BB27EBLAC, 1BB27TZZAC, 1BB27WS2AA, 1BB27ARHAA, 1BB27ARHAB, 1BB27AXRAB, WZ11RXFAB, WZ11RXFAG, WZ11RXFAC, WZ11RXFAH, WZ11RXFAE, WZ11RXFAD
- Item Weight: 4.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: WZ11RXFAI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Magnum Spoiler Parts and Q&A

Q: How to Maintain and Fix the Spoiler on 2008 Dodge Magnum?
A: Before servicing the spoiler on the 300/300C, remove the negative battery cable from its connection. Next up, take off the upper trim panel of the lift gate. Loosen the circles at both the rear washer fluid supply hose and the Chmsl wire harness connector. Unscrew the nuts fastening the rear spoiler to the liftgate, then take the spoiler away somewhat so the wire harness and washer fluid supply hose are visible. Eliminate the rubber grommet from the liftgate top on the right and after passing the wire harness and washer hose through the liftgate opening, remove the spoiler from the back of the car.