How to Install a Liftgate Hinge on 2008 Dodge Magnum?

To install the trunk/liftgate hinge, position the body half at the upper opening, pull down the headliner, and tighten the two nuts to 28 Nm (21 ft. lbs.). Then, attach the liftgate half, secure with screws, adjust the hinge, and reinstall the trim plate.

OEM 2008 Dodge Magnum Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Liftgate Hinges found

View related parts
2008 Dodge Magnum Hinge, Rear Driver Side Part Number: 5112181AB
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Left; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Driver Side
- Replaces: 5112181AA
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.9 x 4.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5112181AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Magnum Hinge, Rear Passenger Side Part Number: 5112180AB
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Right; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Passenger Side
- Replaces: 5112180AA
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.8 x 4.1 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5112180AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Magnum Liftgate Hinge Parts and Q&A

Q: How to Install a Liftgate Hinge on 2008 Dodge Magnum?
A: To install the trunk/liftgate hinge, position the body half at the upper opening, pull down the headliner, and tighten the two nuts to 28 Nm (21 ft. lbs.). Then, attach the liftgate half, secure with screws, adjust the hinge, and reinstall the trim plate.