How to Install a CV Boot for Optimal Performance on 2008 Dodge Nitro?

To install the Constant Velocity Joint Boot, grease the C/V joint components, then attach new clamps and slide the boot down the shaft. Install the inner race, align cages, and apply grease to the bearings. Secure the housing snap ring, fill with grease, and position the boot before tightening the clamps.

OEM 2008 Dodge Nitro CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 CV Boots found

View related parts
2008 Dodge Nitro Outer Boot Part Number: 5066025AB
$51.44 MSRP: $112.00
You Save: $60.56 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Package - Half Shaft; CV Boot; Outer Boot Kit; Boots; Boot Kit Half Shaft Outer
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.3 x 6.2 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5066025AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Nitro Inner Boot Part Number: 5066024AA
$87.78 MSRP: $117.00
You Save: $29.22 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Package - Half Shaft; CV Boot; Inner Boot Kit; Boot Kit Half Shaft Inner
- Item Weight: 1.70 Pounds
- Item Dimensions: 7.9 x 7.3 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5066024AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Nitro CV Boot Parts and Q&A

Q: How to Install a CV Boot for Optimal Performance on 2008 Dodge Nitro?
A: To install the Constant Velocity Joint Boot, grease the C/V joint components, then attach new clamps and slide the boot down the shaft. Install the inner race, align cages, and apply grease to the bearings. Secure the housing snap ring, fill with grease, and position the boot before tightening the clamps.