How to install a hood hinge on 2008 Dodge Nitro?

To install the hood hinge, position it using reference marks, then attach it to the body and hood with nuts, tightening to 20 Nm (15 ft. lbs.). After securing the hinge, install the hood support cylinder and attach two screws to the fender applique.

OEM 2008 Dodge Nitro Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Hinges found

View related parts
2008 Dodge Nitro Hinge, Front Driver Side Part Number: 55360897AD
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left
- Position: Front Driver Side
- Replaces: 55360897AC, 55360897AA, 55360897AB
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.3 x 3.1 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55360897AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- R/T, SE, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Nitro Hinge, Front Passenger Side Part Number: 55360896AD
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right
- Position: Front Passenger Side
- Replaces: 55360896AA, 55360896AB, 55360896AC
- Item Weight: 1.70 Pounds
- Item Dimensions: 14.4 x 3.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55360896AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- R/T, SE, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Nitro Hood Hinge Parts and Q&A

Q: How to install a hood hinge on 2008 Dodge Nitro?
A: To install the hood hinge, position it using reference marks, then attach it to the body and hood with nuts, tightening to 20 Nm (15 ft. lbs.). After securing the hinge, install the hood support cylinder and attach two screws to the fender applique.