How to Install a Hood Hinge on 2007 Dodge Nitro?

Before starting, place the new hinge on the car by using the marks left from the previous removal. Then, add the nuts to the hinge on the body and tighten to 20 Nm (15 ft. lbs.), after which you should attach the hinge to the hood with more nuts and tighten each one to 20 Nm (15 ft. lbs.) Make sure the hood is properly supported with the hinge, add the hood support system next and then screw the fender applique to the hood support cylinder.

OEM 2007 Dodge Nitro Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Hinges found

View related parts
2007 Dodge Nitro Hinge, Front Driver Side Part Number: 55360897AD
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left
- Position: Front Driver Side
- Replaces: 55360897AC, 55360897AA, 55360897AB
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.3 x 3.1 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55360897AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SE, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Hinge, Front Passenger Side Part Number: 55360896AD
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right
- Position: Front Passenger Side
- Replaces: 55360896AA, 55360896AB, 55360896AC
- Item Weight: 1.70 Pounds
- Item Dimensions: 14.4 x 3.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55360896AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SE, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Hood Hinge Parts and Q&A

Q: How to Install a Hood Hinge on 2007 Dodge Nitro?
A: Before starting, place the new hinge on the car by using the marks left from the previous removal. Then, add the nuts to the hinge on the body and tighten to 20 Nm (15 ft. lbs.), after which you should attach the hinge to the hood with more nuts and tighten each one to 20 Nm (15 ft. lbs.) Make sure the hood is properly supported with the hinge, add the hood support system next and then screw the fender applique to the hood support cylinder.