How to Maintain and Fix an Oxygen Sensor on 2008 Dodge Ram 1500?

Before touching an oxygen sensor for service or repair, give the engine time to cool, since these parts may be extremely hot after running. Lift the vehicle, disconnect the sensor's wire connector once it is supported and try not to stress the wire attached to the sensor. Uninstall the O2S sensor using the proper tool, then use a specific tap to clean up any dirt inside the exhaust pipe's threads. You should not smear grease on the connector or the sensor's wiring harness.

OEM 2008 Dodge Ram 1500 Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

View related parts
2008 Dodge Ram 1500 Oxygen Sensor, Front Part Number: 56029050AA
$77.38 MSRP: $114.00
You Save: $36.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.5 x 4.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029050AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 1500 Oxygen Sensor, Front Driver Side Part Number: 56029049AA
$97.32 MSRP: $144.00
You Save: $46.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Dodge Ram 1500 Oxygen Sensor Parts and Q&A

Q: How to Maintain and Fix an Oxygen Sensor on 2008 Dodge Ram 1500?
A: Before touching an oxygen sensor for service or repair, give the engine time to cool, since these parts may be extremely hot after running. Lift the vehicle, disconnect the sensor's wire connector once it is supported and try not to stress the wire attached to the sensor. Uninstall the O2S sensor using the proper tool, then use a specific tap to clean up any dirt inside the exhaust pipe's threads. You should not smear grease on the connector or the sensor's wiring harness.