How to Service and Repair the MAP Sensor for 3.7L/4.7L Engines on 2008 Dodge Ram 1500?

To service the Manifold Pressure/Vacuum Sensor for 3.7L/4.7L engines, clean the MAP sensor mounting hole, inspect the o-ring seal for damage, position the sensor over the locating pin, install and tighten the mounting bolt to 3 Nm, and connect the electrical connector.

OEM 2008 Dodge Ram 1500 MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2008 Dodge Ram 1500 M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 1500 M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Dodge Ram 1500 MAP Sensor Parts and Q&A

Q: How to Service and Repair the MAP Sensor for 3.7L/4.7L Engines on 2008 Dodge Ram 1500?
A: To service the Manifold Pressure/Vacuum Sensor for 3.7L/4.7L engines, clean the MAP sensor mounting hole, inspect the o-ring seal for damage, position the sensor over the locating pin, install and tighten the mounting bolt to 3 Nm, and connect the electrical connector.