Other Name: Seal - Crankshaft Oil; Front Engine Crankshaft Seal; Timing Cover Seal; Gasket; Crankshaft Seal; Front Seal included with Long Block Engine Install Kit.
Position: Front
Replaces: 53021585AB
Item Weight: 0.50 Pounds
Item Dimensions: 1.1 x 3.3 x 3.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 53021585AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 8 Cyl 5.7 L GAS
Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Front Crank Seal; Outer Timing Cover Seal; Seal Crankshaft Oil Front; Crankshaft Seal
Position: Front
Item Weight: 0.50 Pounds
Item Dimensions: 3.4 x 3.5 x 0.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68426385AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
Base, Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL
Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal, Rear; Rear Main Seal Retainer; Crankshaft Rear Oil Seal not included with Long Block Engine Install Kit.
Q: How to Service and Repair a Crankshaft Seal on 2008 Dodge Ram 2500?
A: Before servicing or repairing the front crankshaft seal, ensure the negative battery cable is turned off. After that, take off the accessory drive belt and empty the cooling system. Post-draining, remove the fasteners holding the upper radiator hose and the radiator shroud in place. Start by taking out the radiator cooling fan, then the shroud and then remove the bolt from the crankshaft damper. Remove the damper by inserting 8513A and utilizing a Three Jaw Puller 1023. The last step is to use Crankshaft Front Seal Remover 9071 to take out the front crankshaft seal.