Other Name:Hinge - Front Door Lower; Door Hinge, Front Left Lower, Front Lower, Front Right Lower; Hinge Front Door Lower Lower; Hinge Front Door Lower; Hinge Door Lower; Hinge Door; Door Hinge
Position:Front Lower
Replaces:55112146AA, 55112147AA
Item Weight:2.30 Pounds
Item Dimensions:6.7 x 4.6 x 3.3 inches
Condition:New
Fitment Type:Direct Replacement
SKU:55275634AA
Warranty:This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Ram 3500 Submodels:
Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
Other Name:Hinge - Rear Door Upper; Door Hinge, Rear Left Upper; Hinge Rear Door Upper; Hinge Door Half; Door Hinge
Position:Rear Upper Driver Side
Item Weight:1.70 Pounds
Item Dimensions:6.7 x 3.6 x 3.0 inches
Condition:New
Fitment Type:Direct Replacement
SKU:55276107AB
Warranty:This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Ram 3500 Submodels:
Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
2008 Dodge Ram 3500 Door Hinge Parts and Q&A
Q: How to Replace a Door Hinge Without Taking the Door Off on 2008 Dodge Ram 3500?
A: It is possible to install a new rear door hinge on each side, keeping the washersepoxy-coated, so the door will not have to be adjusted. Before anything else, open the front door. Mark hinge 2's location on the door and b-pillar with the grease pencil for the upper hinge, then remove both nut 1 and bolt 9 on the door and all three bolts 6 on the b-pillar. For the lower hinge, draw its mark on the door and b-pillar with grease pencil, then take off the b-pillar trim. Following that, take off nut 1 and bolt 9 at the hinge joint and remove the bolts that join the hinge to the b-pillar, numbered 5. Then, inside the car, get rid of bolt 4 holding the hinge to the b-pillar and take out the hinge.