How to Install a Power Steering Pressure Switch in 5.7L V-8 Engines on 2008 Dodge Ram 3500?

Owners of HD cars with 5.7L V-8 engines should ensure their pressure switch is right for that model. First, place the power steering switch into the power steering line and secure it to a torque of 8-11 Nm (70-100 in. lbs.). After that, put the connector into the switch. Right after installation, inspect the power steering fluid to see if you must top it up. Turn on the car and validate the power steering fluid again, adding some more if you see it's needed.

OEM 2008 Dodge Ram 3500 Power Steering Pressure Switch

Power Steering Oil Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pressure Switch found

View related parts
2008 Dodge Ram 3500 Pressure Switch, Front Part Number: 56041335AB
$48.21 MSRP: $71.55
You Save: $23.34 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Steering; Power Steering Pressure Switch, Front; Power Steering Pressure Switch; Switch; Switch Power Steering Pressure; Switch Power Steering
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.2 x 1.3 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041335AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2008 Dodge Ram 3500 Power Steering Pressure Switch Parts and Q&A

Q: How to Install a Power Steering Pressure Switch in 5.7L V-8 Engines on 2008 Dodge Ram 3500?
A: Owners of HD cars with 5.7L V-8 engines should ensure their pressure switch is right for that model. First, place the power steering switch into the power steering line and secure it to a torque of 8-11 Nm (70-100 in. lbs.). After that, put the connector into the switch. Right after installation, inspect the power steering fluid to see if you must top it up. Turn on the car and validate the power steering fluid again, adding some more if you see it's needed.