How to Service and Repair an Air Injection Pump on 2008 Dodge Sprinter 2500?

To take care of the air injection pump, first remove the negative battery cable. After that, take out the air filter housing and remove the hose connected to the air pump. Eliminate the air pump solenoid first and then work on the bracket by first taking out its three bolts and then removing the bracket. Separate the tubes between the air pump's right and left outlets and remove the air pump harness connector. At last, loosen the three bolts holding the air pump and remove the pump from the bracket.

OEM 2008 Dodge Sprinter 2500 Air Injection Pump

SAI Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Injection Pump found

View related parts
2008 Dodge Sprinter 2500 Air Pump Part Number: 68011776AA
Product Specifications
- Other Name: Pump - Air; Secondary Air Injection Pump; Air Pump Pulley; A.I.R. Pump; Pump Air
- Item Weight: 2.70 Pounds
- Item Dimensions: 10.6 x 8.4 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68011776AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 2500 Air Injection Pump Parts and Q&A

Q: How to Service and Repair an Air Injection Pump on 2008 Dodge Sprinter 2500?
A: To take care of the air injection pump, first remove the negative battery cable. After that, take out the air filter housing and remove the hose connected to the air pump. Eliminate the air pump solenoid first and then work on the bracket by first taking out its three bolts and then removing the bracket. Separate the tubes between the air pump's right and left outlets and remove the air pump harness connector. At last, loosen the three bolts holding the air pump and remove the pump from the bracket.