How to Install a Front Steering Knuckle on 2008 Dodge Sprinter 2500?

Install a front steering knuckle by attaching it to a lower ball joint stud using a nut that has been tightened to 170 Nm. Install lower strut, rotor, wheel speed sensor, brake caliper, and tighten all of the bolts to required torque. Lastly, fit the front wheels, lower the vehicle and test the toe.

OEM 2008 Dodge Sprinter 2500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2008 Dodge Sprinter 2500 Knuckle, Front Passenger Side Part Number: 68050286AB
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right
- Position: Front Passenger Side
- Replaces: 68050286AA, 68006694AA
- Item Weight: 33.30 Pounds
- Item Dimensions: 17.5 x 11.1 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68050286AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 2500 Knuckle, Front Driver Side Part Number: 68050287AB
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Suspension Knuckle Assembly
- Position: Front Driver Side
- Replaces: 68006695AA, 68050287AA
- Item Weight: 16.50 Pounds
- Item Dimensions: 17.2 x 11.8 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68050287AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 2500 Steering Knuckle Parts and Q&A

Q: How to Install a Front Steering Knuckle on 2008 Dodge Sprinter 2500?
A: Install a front steering knuckle by attaching it to a lower ball joint stud using a nut that has been tightened to 170 Nm. Install lower strut, rotor, wheel speed sensor, brake caliper, and tighten all of the bolts to required torque. Lastly, fit the front wheels, lower the vehicle and test the toe.