How to Safely Remove a Front Steering Knuckle on Dodge Sprinter 2500?

To begin, lift and support the car and then take out the front tires. After that, take the outer tie rod end nut off and use special tool 9360 to remove the outer tie rod from the steering knuckle. Take off the tie rod end shield, then remove the bolts of the disc brake caliper adapter. Get rid of the rotor set screw and wheel speed sensor nut joined to the knuckle after and then pull out the wheel speed sensor from the knuckle. After that, take off the nut from the lower ball joint and then use special tool 9282 to detach the ball joint from the steering knuckle. Unscrew the center bolts from the steering knuckle, take the upper one out, remove the steering knuckle from the vehicle and then release the lower strut from the knuckle too.

How to Install a Front Steering Knuckle on Dodge Sprinter 2500?

Place the front steering knuckle onto the lower ball joint stud and then use the lower ball joint nut to tighten it by 170 Nm (125 ft. lbs.). Then, put on the lower strut and bolts to the steering knuckle and tighten the bolts with 140 Nm (103 ft. lbs.) plus an extra 120° twist. Screw in the rotor onto the hub/bearing and use the rotor set screw to secure it to 22 Nm (16 in. lbs.). Go ahead and fix the wheel speed sensor and nut to the knuckle. Afterward, screw on the disc brake caliper adapter together with the brake caliper; then fasten the bolts to 80 Nm (59 ft. lbs.) plus an extra 40° turn. Then, link the outer tie rod end and shield to the steering knuckle, tighten the nut to about 50 Nm (37 ft. lbs.) and turn it another 60 degrees. After that, attach the front wheels and gently lower the car. When required, also check and adjust the toe setting.

OEM Dodge Sprinter 2500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
Dodge Sprinter 2500 Knuckle, Front Driver Side Part Number: 5135233AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Knuckle, Front Passenger Side Part Number: 5135232AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Knuckle, Front Driver Side Part Number: 68050287AB
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Suspension Knuckle Assembly
- Position: Front Driver Side
- Replaces: 68006695AA, 68050287AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Knuckle, Front Passenger Side Part Number: 68050286AB
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right
- Position: Front Passenger Side
- Replaces: 68050286AA, 68006694AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 2500 Steering Knuckle

Choose OEM Steering Knuckle that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Steering Knuckle follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Sprinter 2500 Steering Knuckle is a very crucial component that provides major boost to the overall reliability and performance of the vehicle. This critical part links the suspension and the steering systems to the front wheels, thus providing the stability of the wheels. The Dodge Sprinter 2500 Steering Knuckle is Universal and applies to rear wheel drive as well as front / all / four wheel drive. This versatility makes it available for multiple sprinter 2500 models, and hence, the ability to work perfectly with the sprinter 2500 lineup. The Dodge Sprinter 2500 Steering Knuckle also allows for the special type of movement that is up and down, in relation to the roads uneven surfaces and side to side in relation to the steering mechanism to ensure that car remains safe, efficient on road. The strong build and mechanical design also assist in determining the competence of the Dodge Sprinter 2500 in the automotive industry. Also, the Dodge Sprinter 2500 Steering Knuckle has further and more developed spindle integrated and hub connection opportunity. In view of this the Dodge Sprinter 2500 Steering Knuckle is responsible for the reputation that this car brand has of being an enduring and high performing vehicle, especially when it comes to handling the hills and curves of a given country. In conclusion, the Dodge Sprinter 2500 Steering Knuckle is no doubt a product of Dodge's standard and this is therefore part of the Sprinter 2500 design enigma.

Dodge Sprinter 2500 Steering Knuckle Parts and Q&A

Knuckle, Front Driver Side
68050287AB
Q: How to Safely Remove a Front Steering Knuckle on Dodge Sprinter 2500?
A:
To begin, lift and support the car and then take out the front tires. After that, take the outer tie rod end nut off and use special tool 9360 to remove the outer tie rod from the steering knuckle. Take off the tie rod end shield, then remove the bolts of the disc brake caliper adapter. Get rid of the rotor set screw and wheel speed sensor nut joined to the knuckle after and then pull out the wheel speed sensor from the knuckle. After that, take off the nut from the lower Ball Joint and then use special tool 9282 to detach the ball joint from the steering knuckle. Unscrew the center bolts from the steering knuckle, take the upper one out, remove the steering knuckle from the vehicle and then release the lower strut from the knuckle too.
Knuckle, Front Passenger Side
68050286AB
Q: How to Install a Front Steering Knuckle on Dodge Sprinter 2500?
A:
Place the front steering knuckle onto the lower Ball Joint stud and then use the lower ball joint nut to tighten it by 170 Nm (125 ft. lbs.). Then, put on the lower strut and bolts to the steering knuckle and tighten the bolts with 140 Nm (103 ft. lbs.) plus an extra 120° twist. Screw in the rotor onto the hub/bearing and use the rotor set screw to secure it to 22 Nm (16 in. lbs.). Go ahead and fix the wheel speed sensor and nut to the knuckle. Afterward, screw on the disc Brake Caliper adapter together with the brake caliper; then fasten the bolts to 80 Nm (59 ft. lbs.) plus an extra 40° turn. Then, link the outer Tie Rod End and shield to the steering knuckle, tighten the nut to about 50 Nm (37 ft. lbs.) and turn it another 60 degrees. After that, attach the front wheels and gently lower the car. When required, also check and adjust the toe setting.