How to Install a Throttle Body on 2008 Dodge Sprinter 2500?

Start by installing the Electronic Throttle Control (4) and I attach it with bolts (2) and (3). Make sure the bolts are tightened to 9 Nm (80 in.lbs.). After that, restore the connection on the Electronic Throttle Control harness connector (1) and fit the Mass Airflow (MAF) Sensor (1). Place the air filter housing and the engine cover after that and at the end, attach the negative battery cable again.

OEM 2008 Dodge Sprinter 2500 Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Bodies found

View related parts
2008 Dodge Sprinter 2500 Throttle Body Part Number: 68012325AA
$603.33 MSRP: $916.00
You Save: $312.67 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Electronic Throttle Body Module
- Replaces: 5175809AA
- Item Weight: 2.70 Pounds
- Item Dimensions: 9.2 x 7.8 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68012325AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL
View related parts
2008 Dodge Sprinter 2500 Throttle Body Part Number: 5159298AA
Product Specifications
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5159298AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 2500 Throttle Body Parts and Q&A

Q: How to Install a Throttle Body on 2008 Dodge Sprinter 2500?
A: Start by installing the Electronic Throttle Control (4) and I attach it with bolts (2) and (3). Make sure the bolts are tightened to 9 Nm (80 in.lbs.). After that, restore the connection on the Electronic Throttle Control harness connector (1) and fit the Mass Airflow (MAF) Sensor (1). Place the air filter housing and the engine cover after that and at the end, attach the negative battery cable again.