OEM 2008 Dodge Sprinter 2500 Fuel Injector

2008 Dodge Sprinter 2500 Fuel Injector Parts and Q&A

• Q: How to Install a Fuel Injector on 2008 Dodge Sprinter 2500?

  A: You should start by placing the fuel injector into the fuel rail and galing it with the fuel injector clip. Clean the bores in the fuel injectors and rub a little oil onto the O-rings to help them go onto the injectors smoothly. Put the fuel rail and fuel injector assembly in place so that each injector aligns with the cylinder head's machined opening and gently guides its O-ring into place. Press down on the right injector rail until you hear a click and feel the injectors on the cylinder head shoulder. Follow this on the left injector rail as well. After that, install the 4 fuel rail mounting bolts, plug in the engine harness and reattach the connectors between the throttle body and all 6 fuel injectors. Run the vacuum hoses to the throttle body and connect the fuel line back to the fuel rail and then add the air box and air duct to the throttle body. Last, insert the negative cable back and put the engine cover on.