How to Install a Harmonic Balancer and Crankshaft Pulley on 2008 Dodge Sprinter 3500?

To install the harmonic balancer and the crankshaft pulley, align the key of the crankshaft and the harmonic balancer and tighten the bolt to 304 Nm plus 90 degrees. Reposition the drive belt, remove the flywheel locking tool, install the transmission valve and cooler lines then the splash shields. Finally, lower the car and reattach the battery cable.

OEM 2008 Dodge Sprinter 3500 Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Harmonic Balancers found

View related parts
2008 Dodge Sprinter 3500 Vibration Damper Part Number: 68056245AA
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer; Pulley
- Replaces: 68013978AA
- Item Weight: 5.20 Pounds
- Item Dimensions: 6.9 x 7.0 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68056245AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2008 Dodge Sprinter 3500 Vibration Damper Part Number: 68064665AA
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer; Pulley
- Replaces: 68005278AA
- Item Weight: 8.10 Pounds
- Item Dimensions: 6.4 x 6.6 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68064665AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 3500 Harmonic Balancer Parts and Q&A

Q: How to Install a Harmonic Balancer and Crankshaft Pulley on 2008 Dodge Sprinter 3500?
A: To install the harmonic balancer and the crankshaft pulley, align the key of the crankshaft and the harmonic balancer and tighten the bolt to 304 Nm plus 90 degrees. Reposition the drive belt, remove the flywheel locking tool, install the transmission valve and cooler lines then the splash shields. Finally, lower the car and reattach the battery cable.