How to Install an Oil Cooler on 2008 Dodge Sprinter 3500?

Before you can install the engine oil cooler, you should first clean every engine mating surface. After setting the oil cooler and gasket in place, put on the fasteners and tighten them to 10.8 Nm (96 in. lbs.). After that, fit the water pump housing assembly with a fresh gasket and secure it with the bolts tightened to 24.5 Nm (18 ft. lbs.). Install the oil cooler coolant hose and then add the power steering reservoir. Fit the heater hoses to the housing first, next the lower radiator hose to the housing and finally the charge air hose. Once that is done, set up the coolant reservoir and its hoses and fit the turbocharger. Attach the air cleaner in its proper place, put coolant in the system and attach the negative battery cable. After that, get the engine to run and warm up, switch it off and check whether any fluid is leaking out.

OEM 2008 Dodge Sprinter 3500 Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Coolers found

View related parts
2008 Dodge Sprinter 3500 Oil Cooler Part Number: 5179360AB
Product Specifications
- Other Name: Cooler - Oil; Engine Oil Cooler; Cooler Oil
- Replaces: 5179360AA
- Item Weight: 2.20 Pounds
- Item Dimensions: 11.0 x 4.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179360AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL
View related parts
2008 Dodge Sprinter 3500 Power Steering Oil Cooler, Front Part Number: 68140155AA
Product Specifications
- Other Name: Cooler - Oil Cooler; Power Steering Cooler, Front; Power Steering Cooler; Cooler Line
- Position: Front
- Replaces: 68006682AA
- Item Weight: 1.60 Pounds
- Item Dimensions: 42.8 x 11.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68140155AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2008 Dodge Sprinter 3500 Power Steering Oil Cooler, Front Part Number: 68140156AA
Product Specifications
- Other Name: Cooler - Power Steering Cooler; Power Steering Cooler, Front; Power Steering Cooler; Cooler Line
- Position: Front
- Replaces: 68006683AA
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68140156AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Oil Cooler Part Number: 68033097AA
Product Specifications
- Other Name: Filter - Oil; Engine Oil Cooler; Oil Cooler Assembly
- Replaces: 68013921AA
- Item Weight: 5.30 Pounds
- Item Dimensions: 15.6 x 8.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033097AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 3500 Oil Cooler Parts and Q&A

Q: How to Install an Oil Cooler on 2008 Dodge Sprinter 3500?
A: Before you can install the engine oil cooler, you should first clean every engine mating surface. After setting the oil cooler and gasket in place, put on the fasteners and tighten them to 10.8 Nm (96 in. lbs.). After that, fit the water pump housing assembly with a fresh gasket and secure it with the bolts tightened to 24.5 Nm (18 ft. lbs.). Install the oil cooler coolant hose and then add the power steering reservoir. Fit the heater hoses to the housing first, next the lower radiator hose to the housing and finally the charge air hose. Once that is done, set up the coolant reservoir and its hoses and fit the turbocharger. Attach the air cleaner in its proper place, put coolant in the system and attach the negative battery cable. After that, get the engine to run and warm up, switch it off and check whether any fluid is leaking out.