How to Install a Cooling Fan Assembly to Ensure Optimal Rear A/C System Performance on 2008 Dodge Sprinter 3500?

As each rear condenser air seal is necessary for proper rear A/C performance, check that each seal goes in the correct spot on the rear A/C condenser when you install the fan. When installing a new rear A/C condenser, be sure to place seals around its edge so that it seals properly with the rear condenser fan unit. Should they have been disconnected, reinstall the two condenser fan brackets. Fix the rear condenser fan unit onto the two condenser fan brackets and two condenser mounting brackets. Secure the fan unit on top of the vehicle with six washers and nuts, tighten well. Link the two wire harnesses at the rear condenser mount bracket. Then, mount the rear condenser cover flush with the vehicle and tighten the retaining screws to 2 Nm (17 in. lbs.). Afterward, secure the negative battery cable again.

OEM 2008 Dodge Sprinter 3500 Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Cooling Fan Assemblys found

View related parts
2008 Dodge Sprinter 3500 Fan Blade Part Number: 68012413AA
$152.53 MSRP: $242.00
You Save: $89.47 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Radiator Fan Assembly; Fan Cooling
- Item Weight: 7.30 Pounds
- Item Dimensions: 18.5 x 18.7 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68012413AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Fan Blade Part Number: 68012412AA
$259.68 MSRP: $395.00
You Save: $135.32 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Radiator Fan Assembly; Fan Cooling
- Item Weight: 5.00 Pounds
- Item Dimensions: 19.0 x 19.3 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68012412AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL
View related parts
2008 Dodge Sprinter 3500 Fan Part Number: 68013666AA
Product Specifications
- Other Name: Radiator Fan Assembly
- Item Weight: 5.90 Pounds
- Item Dimensions: 17.4 x 16.4 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68013666AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 3500 Cooling Fan Assembly Parts and Q&A

Q: How to Install a Cooling Fan Assembly to Ensure Optimal Rear A/C System Performance on 2008 Dodge Sprinter 3500?
A: As each rear condenser air seal is necessary for proper rear A/C performance, check that each seal goes in the correct spot on the rear A/C condenser when you install the fan. When installing a new rear A/C condenser, be sure to place seals around its edge so that it seals properly with the rear condenser fan unit. Should they have been disconnected, reinstall the two condenser fan brackets. Fix the rear condenser fan unit onto the two condenser fan brackets and two condenser mounting brackets. Secure the fan unit on top of the vehicle with six washers and nuts, tighten well. Link the two wire harnesses at the rear condenser mount bracket. Then, mount the rear condenser cover flush with the vehicle and tighten the retaining screws to 2 Nm (17 in. lbs.). Afterward, secure the negative battery cable again.