How to Maintain a Parking Assist Distance Sensor on 2008 Dodge Sprinter 3500?

To service the Parking Assist Distance Sensor, disconnect the battery negative cable and remove the front or rear bumper. Disconnect the wire harness from the sensor, disengage the strap from the bumper receptacle, and then remove the sensor and O-ring together from the receptacle.

OEM 2008 Dodge Sprinter 3500 Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Assist Distance Sensors found

View related parts
2008 Dodge Sprinter 3500 Control Module Part Number: 68078168AA
Product Specifications
- Other Name: Sensor Kit - Parking Assist; Parking Aid Control Module; Control Unit
- Replaces: 68013406AA
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68078168AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Parking Sensor, Rear Part Number: 68010557AC
Product Specifications
- Other Name: Sensor - Parking Assist; Parking Aid Sensor, Front, Rear; Parking Aid Sensor; Parking Sensors; Sensor
- Position: Rear
- Replaces: 68010557AB, 68010557AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68010557AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 3500 Parking Assist Distance Sensor Parts and Q&A

Q: How to Maintain a Parking Assist Distance Sensor on 2008 Dodge Sprinter 3500?
A: To service the Parking Assist Distance Sensor, disconnect the battery negative cable and remove the front or rear bumper. Disconnect the wire harness from the sensor, disengage the strap from the bumper receptacle, and then remove the sensor and O-ring together from the receptacle.