OEM 2008 Dodge Viper Oxygen Sensor

2008 Dodge Viper Oxygen Sensor Parts and Q&A

• Q: How to Service and Repair the 8.4L Upstream 1/1 and 2/1 Oxygen Sensor on 2008 Dodge Viper?

  A: Removing the oxygen sensor service and repair oxygen sensor for an 8.4L upstream 1/1 and 2/1 and first clean exhaust manifold threads with an 18 mm X 1.5 plus 6E tap and remove sensor. If the original sensor is being reused, an anti seize compound such as Loctite(R) 771-64 or an equivalent, applies to the sensor threads. The new sensor is delivered by Loctite with the anti seize compound pre applied. Simply follow the steps, tighten the sensor with an oxygen sensor crow foot wrench to 41Nm, finally (30 ft. lbs.). Finally, you can plug in sensor connector and lower the car.