How to Properly Install an Ignition Coil on 2008 Dodge Viper?

First, attach the ignition coil to the valve cover, after which secure it with bolts tightened to 7 Nm (62 in. lbs.). You should install the electrical connector on the ignition coil, connect it and insert the ignition cable into that coil next. Unscrew the ignition coil cover bolts, allow them to dry and then apply Mopar(R) Lock and Seal Adhesive. After installing the ignition coils, place the cover on them, secure the lines with four bolts at 12 Nm (106 in. lbs.). After that, link the negative battery cable and tighten the nut until it reaches 10 Nm (90 in. lbs.).

OEM 2008 Dodge Viper Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2008 Dodge Viper Ignition Coil Part Number: 5037127AB
$62.72 MSRP: $94.05
You Save: $31.33 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - Ignition; Coil Ignition
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.0 x 3.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037127AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
2008 Dodge Viper Ignition Coil Part Number: 68027788AC
Product Specifications
- Other Name: Cable Package - Ignition; Spark Plug Wire Set; Spark Plug Wire; Cable Assembly; Cable Set
- Replaces: 68027788AB, 68027788AA
- Item Weight: 1.90 Pounds
- Item Dimensions: 14.7 x 8.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68027788AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS, 8.4L V10

2008 Dodge Viper Ignition Coil Parts and Q&A

Q: How to Properly Install an Ignition Coil on 2008 Dodge Viper?
A: First, attach the ignition coil to the valve cover, after which secure it with bolts tightened to 7 Nm (62 in. lbs.). You should install the electrical connector on the ignition coil, connect it and insert the ignition cable into that coil next. Unscrew the ignition coil cover bolts, allow them to dry and then apply Mopar(R) Lock and Seal Adhesive. After installing the ignition coils, place the cover on them, secure the lines with four bolts at 12 Nm (106 in. lbs.). After that, link the negative battery cable and tighten the nut until it reaches 10 Nm (90 in. lbs.).