How to Service the Oxygen Sensor for the 8.4L Engine on Dodge Viper?

Clean the engine's exhaust manifold threads with an 18 mm X 1.5 + 6E tap and remove the sensor before servicing the upstream oxygen sensors for the 8.4L model. If using the old sensor, apply some anti-seize compound, for example Loctite(R) 771-64, to its threads, as brand-new sensors do not need this step. After that, use a crow footwrench to install the sensor and tighten it to 41 Nm (30 ft. lbs.). The sensor must also be plugged in before you lower the vehicle to the ground.

How to Replace an Upstream Heated Oxygen Sensor on Dodge Viper?

First, lift and support your vehicle and then remove the connector from the heated oxygen sensor. Remove the sensor by using a crow foot wrench like the Snap-On YA8875 or one that is equivalent. Clean the exhaust manifold threads with a 18 mm X 1.5 + 6E tap after you have removed the stud. If you're reusing, cover the sensor threads with anti-seize compound Loctite 771-64 or a similar product; sensors purchased new do not require more compound, simply install them. Put the oxygen sensor in place with the crow foot wrench and tighten it to 27 Nm or 20 ft. lbs. After that, join the sensor connector and take the vehicle to below.

OEM Dodge Viper Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Oxygen Sensors found

View related parts
Dodge Viper Oxygen Sensor, Front Passenger Side Part Number: 5149180AB
$123.50 MSRP: $182.00
You Save: $58.50 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Oxygen Sensor; includes upstream and downstream sensors for both driver and passenger sides.
- Position: Front Passenger Side
- Replaces: 5149180AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Oxygen Sensor, Front Part Number: 56029050AA
$77.38 MSRP: $114.00
You Save: $36.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Oxygen Sensor, Front Passenger Side Part Number: 56028995AB
$76.54 MSRP: $117.00
You Save: $40.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Oxygen Sensor, Rear Driver Side Part Number: 68090640AB
$87.26 MSRP: $132.00
You Save: $44.74 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor; After Catalytic Driver Side.
- Position: Rear Driver Side
- Replaces: 68090640AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Oxygen Sensor, Front Passenger Side Part Number: 56041212
$137.09 MSRP: $202.00
You Save: $64.91 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front Right; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Dodge Viper | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Oxygen Sensor, Rear Part Number: 56041706AA
$152.73 MSRP: $231.00
You Save: $78.27 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear, Rear Left; Rear Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Viper Oxygen Sensor, Rear Part Number: 56041212AE
$132.51 MSRP: $197.00
You Save: $64.49 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear; Front Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Viper | ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Oxygen Sensor, Rear Part Number: 56041212AF
$141.50 MSRP: $212.00
You Save: $70.50 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Viper | ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Oxygen Sensor, Front Part Number: 56041699AA
$145.99 MSRP: $219.00
You Save: $73.01 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Viper Oxygen Sensor Part Number: 56028301
Product Specifications
- Other Name: Sensor - Oxygen; Front Oxygen Sensor; Sensor, Oxygen (Oxygen Sensor); Sensor, Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1995 Dodge Viper | Base | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Oxygen Sensor Part Number: 56041004
Product Specifications
- Other Name: Sensor - Oxygen; Sensor, Oxygen (Oxygen Sensor); Sensor, Oxygen; Sensor Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Dodge Viper | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS

Dodge Viper Oxygen Sensor

Choose OEM Oxygen Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Oxygen Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Viper Oxygen Sensor is one of the car's most functional driving components that define the authenticity of the Dodge Viper. This sensor carefully measures the air/fuel blend by sampling unburned oxygen in the exhaust stream and provides a voltage signal to the engine control computer for refinement of the engine's efficiency to achieve minimum emission. The Dodge Viper Oxygen Sensor with high durability always equipped with the sensing element of zirconium dioxide coated element platinum to make then run smoothly even in the hot temperature. Versatility is evidenced by the ability to fit different models of the Viper such as RT/10 and GTS while showing that it plays an important roles of boosting the efficiency of the car's engines and safety systems. Upstream sensor is the Oxygen Sensor which gives important feedback; some cars are equipped with an air/fuel ratio sensor for better results. Dodge Viper Oxygen Sensor should be checked frequently so that increased emission and fuel consumption is regulated and so that the engine will run at its optimum. Some of these include the heater coil that is incorporated into the oxygen sensor itself and provides for an easy and fast warm up of the sensor that is unique in the automotive market, and thus the Dodge Viper Oxygen Sensor is well recommended to enhance the performance of the automobile as it guarantees efficiency. In conclusion, the Dodge Viper and its Oxygen Sensor are of offering the perfect symbol of devotion to the production of great innovation that has made a sports car segment well-known in the market.

Dodge Viper Oxygen Sensor Parts and Q&A

Oxygen Sensor, Front Passenger Side
56028995AB
Q: How to Service the Oxygen Sensor for the 8.4L Engine on Dodge Viper?
A:
Clean the engine's Exhaust Manifold threads with an 18 mm X 1.5 + 6E tap and remove the sensor before servicing the upstream oxygen sensors for the 8.4L model. If using the old sensor, apply some anti-seize compound, for example Loctite(R) 771-64, to its threads, as brand-new sensors do not need this step. After that, use a crow footwrench to install the sensor and tighten it to 41 Nm (30 ft. lbs.). The sensor must also be plugged in before you lower the vehicle to the ground.
Oxygen Sensor, Rear
56041212AF
Q: How to Replace an Upstream Heated Oxygen Sensor on Dodge Viper?
A:
First, lift and support your vehicle and then remove the connector from the heated oxygen sensor. Remove the sensor by using a crow foot wrench like the Snap-On YA8875 or one that is equivalent. Clean the Exhaust Manifold threads with a 18 mm X 1.5 + 6E tap after you have removed the stud. If you're reusing, cover the sensor threads with anti-seize compound Loctite 771-64 or a similar product; sensors purchased new do not require more compound, simply install them. Put the oxygen sensor in place with the crow foot wrench and tighten it to 27 Nm or 20 ft. lbs. After that, join the sensor connector and take the vehicle to below.