How to Service and Repair a Wheelhouse Fender Liner on 2008 Jeep Commander?

Remove the wheel before you start to service and repair the front fender liner. After that, pull out both pushpins and the three rivets. After that, drop out the eight rivets holding the liner to the wheel flare molding prior to removing the liner. Process the rear fender liner much like you did the front one-if necessary, remove the wheel, take out the pushpins and all the rivets and then remove the liner.

OEM 2008 Jeep Commander Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wheelhouses found

View related parts
2008 Jeep Commander Wheelhouse Liner, Rear Driver Side Part Number: 55396467AB
$93.93 MSRP: $108.00
You Save: $14.07 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender; Quarter Panel Splash Shield, Rear Left; Fender Splash Shield; Shield Fender
- Position: Rear Driver Side
- Item Weight: 9.90 Pounds
- Item Dimensions: 34.2 x 21.7 x 21.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396467AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Wheelhouse Liner, Rear Passenger Side Part Number: 55396466AB
$99.31 MSRP: $114.00
You Save: $14.69 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender; Quarter Panel Splash Shield, Rear Right; Fender Splash Shield; Shield Fender
- Position: Rear Passenger Side
- Item Weight: 5.70 Pounds
- Item Dimensions: 40.7 x 20.2 x 14.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396466AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Fender Liner, Front Driver Side Part Number: 55396463AC
$105.94 MSRP: $158.00
You Save: $52.06 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender Side; Fender Splash Shield, Front Left; Liner Fender Side; Fender Splash Shield
- Position: Front Driver Side
- Replaces: 55396463AB, 55396463AA
- Item Weight: 3.60 Pounds
- Item Dimensions: 40.4 x 25.0 x 19.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396463AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Fender Liner, Front Passenger Side Part Number: 55396462AC
$105.94 MSRP: $158.00
You Save: $52.06 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender Side; Fender Splash Shield, Front Right; Liner Fender Side; Fender Splash Shield
- Position: Front Passenger Side
- Replaces: 55396462AA, 55396462AB
- Item Weight: 2.40 Pounds
- Item Dimensions: 31.2 x 18.5 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396462AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Wheelhouse Parts and Q&A

Q: How to Service and Repair a Wheelhouse Fender Liner on 2008 Jeep Commander?
A: Remove the wheel before you start to service and repair the front fender liner. After that, pull out both pushpins and the three rivets. After that, drop out the eight rivets holding the liner to the wheel flare molding prior to removing the liner. Process the rear fender liner much like you did the front one-if necessary, remove the wheel, take out the pushpins and all the rivets and then remove the liner.