How to Install a Rear Door Latch Assembly on 2008 Jeep Liberty?

Installing the rear door latch should start by attaching the first latch point to the latch bracket. Make sure the third attachment is straight before going on to attach the second attachment. Next up, link the second attachment point to the latch bracket and then the third point after that. Instal the release rod as the first step and then pull the two swing clips into place. Slide the latch bracket assembly into the slots on the carrier plate (1) and move it until you feel it seat. After connecting the electrical connector, install the American unit carrier plate. Toward the end, adjust the latch to your satisfaction.

OEM 2008 Jeep Liberty Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Door Latch Assemblys found

View related parts
2008 Jeep Liberty Lock Actuator, Rear Passenger Side Part Number: 4589278AJ
$142.62 MSRP: $213.00
You Save: $70.38 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Rear Door; Rear Right Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Passenger Side
- Replaces: 4589278AC, 4589278AE, 4589278AH, 4589278AF, 4589278AD, 4589278AG, 4589278AI
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.2 x 3.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589278AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Lock Actuator, Rear Driver Side Part Number: 4589279AJ
$145.99 MSRP: $218.00
You Save: $72.01 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Rear Door; Rear Left Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Driver Side
- Replaces: 4589279AC, 4589279AD, 4589279AI, 4589279AE, 4589279AG, 4589279AH, 4589279AF
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.2 x 4.1 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589279AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Lock Actuator, Front Driver Side Part Number: 4589467AH
$149.36 MSRP: $223.00
You Save: $73.64 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Left; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Driver Side
- Replaces: 4589467AB, 4589467AD, 4589467AC, 4589467AG, 4589467AE, 4589467AF, 4589467AA
- Item Weight: 2.70 Pounds
- Item Dimensions: 6.5 x 4.0 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589467AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Lock Actuator, Front Passenger Side Part Number: 4589466AH
$152.73 MSRP: $228.00
You Save: $75.27 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Front Right Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Passenger Side
- Replaces: 4589466AA, 4589466AD, 4589466AC, 4589466AE, 4589466AB, 4589466AG, 4589466AF
- Item Weight: 2.30 Pounds
- Item Dimensions: 7.2 x 5.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589466AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

2008 Jeep Liberty Door Latch Assembly Parts and Q&A

Q: How to Install a Rear Door Latch Assembly on 2008 Jeep Liberty?
A: Installing the rear door latch should start by attaching the first latch point to the latch bracket. Make sure the third attachment is straight before going on to attach the second attachment. Next up, link the second attachment point to the latch bracket and then the third point after that. Instal the release rod as the first step and then pull the two swing clips into place. Slide the latch bracket assembly into the slots on the carrier plate (1) and move it until you feel it seat. After connecting the electrical connector, install the American unit carrier plate. Toward the end, adjust the latch to your satisfaction.