How to Install a Power Steering Cooler on 2008 Jeep Liberty?

Open the front of the car, remove the core support and place the cooler below it, also known as the front fascia. Then, fasten the front panel over the PC with push pins and tighten the three cooler screws to 4 Nm (35 in. lbs.). Subsequently, fasten the hoses to the cooler with new crimp clamps. After doing the above, return the vehicle to the ground and add power steering fluid.

OEM 2008 Jeep Liberty Power Steering Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Cooler found

View related parts
2008 Jeep Liberty Oil Cooler Part Number: 52125494AC
$142.72 MSRP: $216.00
You Save: $73.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler - Power Steering; Power Steering Cooler; Cooler Power Steering
- Replaces: 52125494AB, 52125494AA
- Item Weight: 1.70 Pounds
- Item Dimensions: 4.4 x 5.2 x 17.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125494AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

2008 Jeep Liberty Power Steering Cooler Parts and Q&A

Q: How to Install a Power Steering Cooler on 2008 Jeep Liberty?
A: Open the front of the car, remove the core support and place the cooler below it, also known as the front fascia. Then, fasten the front panel over the PC with push pins and tighten the three cooler screws to 4 Nm (35 in. lbs.). Subsequently, fasten the hoses to the cooler with new crimp clamps. After doing the above, return the vehicle to the ground and add power steering fluid.