Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X | 2.0L L4, 3.0L V6, 3.6L V6, 3.8L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.8 L GAS, 8 Cyl 6.4 L GAS
2008 Jeep Wrangler Headlight Bulb Parts and Q&A
Q: How to Replace a Headlight Bulb on 2008 Jeep Wrangler?
A: Before touching the headlamp bulb, disconnect and separate the negative battery cable. After that, take the headlamp out of the mounting collar. Pull the tabs at the sides of the headlamp bulb socket to hold the base, then turn the base counterclockwise about 30 degrees until unlocked. After that, remove the bulb and base by pulling them out from the keyed opening in the headlamp. Avoid touching the bulb glass with your fingers or setting it down somewhere greasy, because that could diminish the bulb's life.