How to install an Oil Pressure Switch for the Fuel Pump on 2009 Chrysler 300?

Installation of the fuel pump will require Mopar(R) Thread Sealant to the threads before installing the Oil Pressure Switch. Install the switch (part number 1) and connect the electrical connector. Get the vehicle down, turn on the engine and look at the leaks. Finally, check and change engine oil level (where necessary).

OEM 2009 Chrysler 300 Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2009 Chrysler 300 Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C Luxury, C Platinum, C SRT8, Limited, S | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Switch - Oil Pressure Part Number: 5149098AB
$38.57 MSRP: $55.60
You Save: $17.03 (31%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Chrysler 300 Submodels:
- Base, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Chrysler 300 Oil Pressure Switch Parts and Q&A

Q: How to install an Oil Pressure Switch for the Fuel Pump on 2009 Chrysler 300?
A: Installation of the fuel pump will require Mopar(R) Thread Sealant to the threads before installing the Oil Pressure Switch. Install the switch (part number 1) and connect the electrical connector. Get the vehicle down, turn on the engine and look at the leaks. Finally, check and change engine oil level (where necessary).