How to Maintain a Power Steering Reservoir on 2009 Chrysler 300?

First, remove the negative cable from the battery post to keep the battery from getting involved. Drain the taken from the power steering pump reservoir. After that, take out the air cleaner housing and the inlet tube going to the throttle body. Once done, undo the clamp and take off the supply line at the reservoir. Start by opening the hose clamp and following it by opening the clamp at the reservoir to take out the return hose. Pull the reservoir out of the coolant bottle by sliding it down the guide until it's free.

OEM 2009 Chrysler 300 Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Reservoir found

View related parts
2009 Chrysler 300 Reservoir Part Number: 4782345AC
$115.67 MSRP: $171.00
You Save: $55.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Power Steering Fluid; Power Steering Reservoir; Reservoir Power Steering Fluid; Reservoir Power Steering Pump
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.9 x 4.8 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782345AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2009 Chrysler 300 Power Steering Reservoir Parts and Q&A

Q: How to Maintain a Power Steering Reservoir on 2009 Chrysler 300?
A: First, remove the negative cable from the battery post to keep the battery from getting involved. Drain the taken from the power steering pump reservoir. After that, take out the air cleaner housing and the inlet tube going to the throttle body. Once done, undo the clamp and take off the supply line at the reservoir. Start by opening the hose clamp and following it by opening the clamp at the reservoir to take out the return hose. Pull the reservoir out of the coolant bottle by sliding it down the guide until it's free.