How to Remove and Replace a Rear Brake Line on 2009 Chrysler Aspen?

Set the brake line (6) into the junction block (2) at the frame and connect it with the hose from the brake caliper to remove and replace the rear brake line. Should you have replaced brake line (1), attach it to the junction block on the frame and hook it up to brake caliper hose (6). Once everything is installed, get the vehicle to a lower position, remove the support jack and next, remove the prop rod. The next step is to bleed the affected area of the brakes; if you don't achieve the right pedal feel, a complete bleed is necessary.

OEM 2009 Chrysler Aspen Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Lines found

View related parts
2009 Chrysler Aspen Flex Hose, Front Driver Side Part Number: 52010491AD
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Left; Brake Hydraulic Line, Front Left; Brake Hose; Brake Line; Hose And Tube Assembly Brake Left Front; Hose Brake; Hydraulic Hose
- Position: Front Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 19.6 x 8.3 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010491AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Flex Hose, Rear Driver Side Part Number: 52855381AA
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Line, Rear Right/Left; Rear Brake Hose; Brake Line; Hose And Tube Assembly Brake Rear; Hose Brake; Hydraulic Hose
- Position: Rear Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 18.3 x 6.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855381AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Flex Hose, Front Passenger Side Part Number: 52010484AD
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose And Tube Assembly Brake Right Front; Hose Brake; Hydraulic Hose
- Position: Front Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.2 x 8.1 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52010484AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Chrysler Aspen Brake Line Parts and Q&A

Q: How to Remove and Replace a Rear Brake Line on 2009 Chrysler Aspen?
A: Set the brake line (6) into the junction block (2) at the frame and connect it with the hose from the brake caliper to remove and replace the rear brake line. Should you have replaced brake line (1), attach it to the junction block on the frame and hook it up to brake caliper hose (6). Once everything is installed, get the vehicle to a lower position, remove the support jack and next, remove the prop rod. The next step is to bleed the affected area of the brakes; if you don't achieve the right pedal feel, a complete bleed is necessary.