How to Service the ABS Control Module on 2009 Chrysler Aspen?

You should first remove the left front tire and wheel assembly before starting Electronic Brake Control Module service. Remove the plug from the ABM module first and then remove the two screws holding the module in place. Part the two units by at least 38 mm (1.5 in.) to preserve the pressure sensor and connection, to keep it from breaking and decreasing the tool's reliability. Avoid touching the sensor terminals on the HCU and the contact pads on the ABM to stop possible contamination and problems later. You don't have to remove the HCU to disconnect the ABM module.

OEM 2009 Chrysler Aspen ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2009 Chrysler Aspen Control Module Part Number: 68043460AA
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; Modulator; Control Unit Anti-Lock Brake
- Item Weight: 6.30 Pounds
- Item Dimensions: 9.6 x 7.8 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68043460AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Modulator Valve Part Number: 68043463AB
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module; Module
- Replaces: 68043463AA
- Item Weight: 2.10 Pounds
- Item Dimensions: 5.5 x 5.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68043463AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Chrysler Aspen ABS Control Module Parts and Q&A

Q: How to Service the ABS Control Module on 2009 Chrysler Aspen?
A: You should first remove the left front tire and wheel assembly before starting Electronic Brake Control Module service. Remove the plug from the ABM module first and then remove the two screws holding the module in place. Part the two units by at least 38 mm (1.5 in.) to preserve the pressure sensor and connection, to keep it from breaking and decreasing the tool's reliability. Avoid touching the sensor terminals on the HCU and the contact pads on the ABM to stop possible contamination and problems later. You don't have to remove the HCU to disconnect the ABM module.