How to Remove and Replace a Front Brake Line on Chrysler Aspen?

Push the brake hose into the correct place and hold it down with the retaining clip at the frame before moving on. After that, link the brake line to the brake hose and tighten it by 19 Nm (170 in.lbs). Then, connect the brake hose banjo bolt to the caliper and tighten it so that it measures 18 Nm (155 in.lbs). Then, remove the support, lower the vehicle and finally remove the prop rod. After that, thoroughly bleed the site of your brake work; if the pedal still doesn't feel right, conduct a system base bleed process.

How to Remove and Replace a Rear Brake Line on Chrysler Aspen?

First, fit the brake line (6) into the junction block (2) at the frame and then join it to the brake caliper hose. If you have replaced the brake line, fit the new one at the junction point on the frame and then at the hose connected to the brake caliper at (6). Once installed, reduce the car and take away the support, promptly remove the prop rod. After everything else, thoroughly bleed the area affected by the brake system and only if you do not get a proper feel from the pedal, perform a base bleed task.

OEM Chrysler Aspen Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Lines found

View related parts
Chrysler Aspen Flex Hose, Front Driver Side Part Number: 52010491AD
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Left; Brake Hydraulic Line, Front Left; Brake Hose; Brake Line; Hose And Tube Assembly Brake Left Front; Hose Brake; Hydraulic Hose
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Flex Hose, Front Passenger Side Part Number: 52010484AD
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose And Tube Assembly Brake Right Front; Hose Brake; Hydraulic Hose
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Flex Hose, Rear Driver Side Part Number: 52855381AA
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Line, Rear Right/Left; Rear Brake Hose; Brake Line; Hose And Tube Assembly Brake Rear; Hose Brake; Hydraulic Hose
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen Brake Line

Choose OEM Brake Line that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Brake Line follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Brake Line is what links Chrylser Aspen vehicles with the hydraulic brake system which makes for efficient and safe stopping of the car. The Brake Line is Siemens part that is intended to transport brake fluid from the master cylinder to the brake caliper pistons, and it is indispensable for safety and performance. This Brake Line is designed for the Chrysler Aspen models manufactured between 2006 and 2008, and is built to last through daily use and confrontations with corrosive substances such as road salt. The Brake Line is of metallic make and it is sturdy but potential problems include corrosion of the line or external physical damage that will cause brake fluid leakage and poor braking. In particular, the presence of the kits of the pre-bent brake line made of stainless, which is a material that does not corrode adds value to the Brake Line because it outlines a direct replacement solution to the product. Further, rising to the use of steel braided flexible hose, can increase performance to great extend, as this results in a firmer brake pedal that provides the driver with more confidence. The Brake Line also adds to the conforming of the vehicle, but also gives the drivers a secure and efficient brake that sets the Chrysler group apart from others in the auto industry. This Brake Line focuses on the elements of dependability and security, which are playing significant roles in the Chrysler Aspen's automotive engineering system.

Chrysler Aspen Brake Line Parts and Q&A

Flex Hose, Front Passenger Side
52010484AD
Q: How to Remove and Replace a Front Brake Line on Chrysler Aspen?
A:
Push the brake hose into the correct place and hold it down with the retaining clip at the frame before moving on. After that, link the brake line to the brake hose and tighten it by 19 Nm (170 in.lbs). Then, connect the brake hose banjo bolt to the caliper and tighten it so that it measures 18 Nm (155 in.lbs). Then, remove the support, lower the vehicle and finally remove the prop rod. After that, thoroughly bleed the site of your brake work; if the pedal still doesn't feel right, conduct a system base bleed process.
Flex Hose, Rear Driver Side
52855381AA
Q: How to Remove and Replace a Rear Brake Line on Chrysler Aspen?
A:
First, fit the brake line (6) into the junction block (2) at the frame and then join it to the brake caliper hose. If you have replaced the brake line, fit the new one at the junction point on the frame and then at the hose connected to the brake caliper at (6). Once installed, reduce the car and take away the support, promptly remove the prop rod. After everything else, thoroughly bleed the area affected by the brake system and only if you do not get a proper feel from the pedal, perform a base bleed task.