How to Install a Front Steering Knuckle on 2009 Chrysler Aspen?

To install the front steering knuckle, clean the ball joint stud tapers. Install hub/bearing and set bolts to 163 Nm. Fix the knuckle in the ball joints, tightening the upper nut to 75 Nm and 95 Nm for the lowest. Install tie rod end, halfshaft, ABS sensor and wheel installation, and wheel alignment.

OEM 2009 Chrysler Aspen Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2009 Chrysler Aspen Knuckle, Front Passenger Side Part Number: 52113228AE
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 52113228AB, 52113228AC, 52113228AD
- Item Weight: 11.80 Pounds
- Item Dimensions: 18.8 x 12.9 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113228AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Knuckle, Front Driver Side Part Number: 52113229AE
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 52113229AC, 52113229AD, 52113229AB
- Item Weight: 11.20 Pounds
- Item Dimensions: 18.5 x 13.1 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113229AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Chrysler Aspen Steering Knuckle Parts and Q&A

Q: How to Install a Front Steering Knuckle on 2009 Chrysler Aspen?
A: To install the front steering knuckle, clean the ball joint stud tapers. Install hub/bearing and set bolts to 163 Nm. Fix the knuckle in the ball joints, tightening the upper nut to 75 Nm and 95 Nm for the lowest. Install tie rod end, halfshaft, ABS sensor and wheel installation, and wheel alignment.