How to Install the Alternator on a 2.0L/2.4L Engine on 2009 Chrysler Sebring?

Before installing the generator, move the A/C compressor so it's not in the way. Turn the generator to place it where it belongs, with terminal 1 in front of line 2 for the A/C. Adjust the lower and upper mounting bolts a little, but finish by fastening them to 54 Nm (40 ft. lbs.). Next, fit the B+ terminal nut and wire tightly against the screw, make sure it's screwed in 10 Nm (88.5 in. lbs.) and insert the field circuit into the generator. After installing the idler pulley and tightening the bolt, you should put on the serpentine belt. You'll need to install the splash shield and the lower air dam next. Now, bring the chassis back to normal and link the negative wire from the battery.

OEM 2009 Chrysler Sebring Alternator

Generator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Alternators found

View related parts
2009 Chrysler Sebring Alternator Part Number: 5033756AB
$386.21 MSRP: $545.00
You Save: $158.79 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Alternator - Engine; Generator Engine
- Item Weight: 14.50 Pounds
- Item Dimensions: 10.6 x 10.0 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033756AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2009 Chrysler Sebring Alternator Part Number: 4801323AK
$536.40 MSRP: $812.00
You Save: $275.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Alternator, Engine; Alternators; Generator Engine
- Replaces: 4801323AB, 4801323AC, 4801323AD
- Item Weight: 15.00 Pounds
- Item Dimensions: 10.5 x 10.1 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801323AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler Sebring Alternator Part Number: 4801477AG
$378.81 MSRP: $848.00
You Save: $469.19 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Alternator - Engine; Generator Engine
- Replaces: 4801477AA
- Item Weight: 16.90 Pounds
- Item Dimensions: 10.2 x 9.9 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801477AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler Sebring Alternator Part Number: 5033759AB
Product Specifications
- Other Name: Alternator - Engine; Alternators; Generator Engine
- Item Weight: 12.70 Pounds
- Item Dimensions: 10.6 x 10.0 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033759AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Chrysler Sebring Alternator Parts and Q&A

Q: How to Install the Alternator on a 2.0L/2.4L Engine on 2009 Chrysler Sebring?
A: Before installing the generator, move the A/C compressor so it's not in the way. Turn the generator to place it where it belongs, with terminal 1 in front of line 2 for the A/C. Adjust the lower and upper mounting bolts a little, but finish by fastening them to 54 Nm (40 ft. lbs.). Next, fit the B+ terminal nut and wire tightly against the screw, make sure it's screwed in 10 Nm (88.5 in. lbs.) and insert the field circuit into the generator. After installing the idler pulley and tightening the bolt, you should put on the serpentine belt. You'll need to install the splash shield and the lower air dam next. Now, bring the chassis back to normal and link the negative wire from the battery.