How to Remove and Replace a Rear Brake Caliper on 2009 Chrysler Sebring?

You should use a brake pedal holding tool to push the brake pedal more than one inch (25mm) down and keep it that way which helps stop brake fluid from exiting the hydraulic system. After that, lift up the vehicle and secure it, take out the three wheel mounting nuts and then remove the rear tire and wheel assembly. Untwist the brake tube nut at the rear flex hose, disconnect the clip keeping the rear flex hose in place on the trailing link mounted bracket and take off the flex hose from the bracket. Take apart the brake caliper and take out the brake flex hose. Make sure to notice that one of the guide pin bolts has a special sleeve at the end. Before tightening it, insert the sleeve into the upper mounting hole. After removing the two brake plate guide pin bolts, just slide and lift the disc brake caliper (with the outboard pad attached) off the bracket, inboard brake pad and rotor. In the end, pry the retaining clip off the caliper and lift the outboard brake pad out.

OEM 2009 Chrysler Sebring Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Calipers found

View related parts
2009 Chrysler Sebring Caliper, Rear Passenger Side Part Number: 5191268AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 4.30 Pounds
- Item Dimensions: 9.5 x 7.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191268AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Caliper, Front Driver Side Part Number: 5191239AA
$113.04 MSRP: $171.00
You Save: $57.96 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Driver Side
- Item Weight: 8.00 Pounds
- Item Dimensions: 9.5 x 7.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191239AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Caliper, Rear Driver Side Part Number: 5191267AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.1 x 7.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191267AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Caliper, Front Passenger Side Part Number: 5191238AA
$130.02 MSRP: $181.00
You Save: $50.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 8.10 Pounds
- Item Dimensions: 9.3 x 7.4 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191238AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Chrysler Sebring Brake Caliper Parts and Q&A

Q: How to Remove and Replace a Rear Brake Caliper on 2009 Chrysler Sebring?
A: You should use a brake pedal holding tool to push the brake pedal more than one inch (25mm) down and keep it that way which helps stop brake fluid from exiting the hydraulic system. After that, lift up the vehicle and secure it, take out the three wheel mounting nuts and then remove the rear tire and wheel assembly. Untwist the brake tube nut at the rear flex hose, disconnect the clip keeping the rear flex hose in place on the trailing link mounted bracket and take off the flex hose from the bracket. Take apart the brake caliper and take out the brake flex hose. Make sure to notice that one of the guide pin bolts has a special sleeve at the end. Before tightening it, insert the sleeve into the upper mounting hole. After removing the two brake plate guide pin bolts, just slide and lift the disc brake caliper (with the outboard pad attached) off the bracket, inboard brake pad and rotor. In the end, pry the retaining clip off the caliper and lift the outboard brake pad out.