How to Install an Oil Pressure Switch for a Fuel Pump on 2009 Chrysler Sebring?

Installation of the oil pressure switch of the fuel pump should be done with care so that it is not over-tightened. Tighten with oil pressure socket C-4597 to 8 Nm. Install the electrical connector, fit the A/C compressor, screw the bolts to 25 Nm, fit the accessory drive belt and reconnect the negative battery cable.

OEM 2009 Chrysler Sebring Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2009 Chrysler Sebring Oil Pressure Sending Unit Part Number: 68003360AA
$32.96 MSRP: $49.15
You Save: $16.19 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Switch Package Oil Pressure; Oil Pressure Switch
- Replaced by: 68003360AC
- Replaces: 5033317AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003360AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler Sebring Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Chrysler Sebring Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch for a Fuel Pump on 2009 Chrysler Sebring?
A: Installation of the oil pressure switch of the fuel pump should be done with care so that it is not over-tightened. Tighten with oil pressure socket C-4597 to 8 Nm. Install the electrical connector, fit the A/C compressor, screw the bolts to 25 Nm, fit the accessory drive belt and reconnect the negative battery cable.