How Can a Seat Heater Be Installed to Prevent Premature Failure on 2009 Chrysler Sebring?

During installation of the replacement heating element, one should not bend it to avoid failure. Take off the adhesive backing and attach it to the foam pad. Install electrical connectors, reinstall the battery and check the heated seat system. Attach the trim cover, and use correct routing of wires, and dispose of old heater element.

OEM 2009 Chrysler Sebring Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

View related parts
2009 Chrysler Sebring Seat Cushion Heater Part Number: 4610087AA
Product Specifications
- Other Name: Pad - Heater; Seat Heater; Seat Back Heater; Element; Pad Heater
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.5 x 7.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4610087AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Seat Cushion Heater Part Number: 4610079AA
Product Specifications
- Other Name: Pad - Heater; Seat Back Cushion; Seat Heater; Seat Back Heater; Pad Heater Cushion; Pad Heater
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.2 x 7.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4610079AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Chrysler Sebring Seat Heater Parts and Q&A

Q: How Can a Seat Heater Be Installed to Prevent Premature Failure on 2009 Chrysler Sebring?
A: During installation of the replacement heating element, one should not bend it to avoid failure. Take off the adhesive backing and attach it to the foam pad. Install electrical connectors, reinstall the battery and check the heated seat system. Attach the trim cover, and use correct routing of wires, and dispose of old heater element.