How to Maintain Your Seat Heater on 2008 Chrysler Sebring?

To service the heated seat, disconnect the battery negative cable, and then remove the seat cushion or back trim cover. Disconnect the electrical connectors from the faulty heating element and remove the wires flush with the connections. Do not remove the factory heating elements as they are permanently attached, the replacement element goes on top.

OEM 2008 Chrysler Sebring Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

View related parts
2008 Chrysler Sebring Seat Cushion Heater Part Number: 4610079AA
Product Specifications
- Other Name: Pad - Heater; Seat Back Cushion; Seat Heater; Seat Back Heater; Pad Heater Cushion; Pad Heater
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.2 x 7.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4610079AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Seat Cushion Heater Part Number: 4610087AA
Product Specifications
- Other Name: Pad - Heater; Seat Heater; Seat Back Heater; Element; Pad Heater
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.5 x 7.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4610087AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Chrysler Sebring Seat Heater Parts and Q&A

Q: How to Maintain Your Seat Heater on 2008 Chrysler Sebring?
A: To service the heated seat, disconnect the battery negative cable, and then remove the seat cushion or back trim cover. Disconnect the electrical connectors from the faulty heating element and remove the wires flush with the connections. Do not remove the factory heating elements as they are permanently attached, the replacement element goes on top.