Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
Position: Front
Replaces: 4672311AA, 52851601AB, 4896061AA
Item Weight: 0.40 Pounds
Item Dimensions: 1.2 x 1.4 x 2.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4896061AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Avenger Submodels:
R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
Position: Outer
Replaces: 4896065AA
Item Weight: 0.40 Pounds
Item Dimensions: 2.5 x 1.2 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4896065AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Avenger Submodels:
R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
2009 Dodge Avenger Air Bag Sensor Parts and Q&A
Q: How to Service an Air Bag Sensor for Front Impact on 2009 Dodge Avenger?
A: Disconnect the negative battery cable and isolate it during service of the front impact sensor and wait at least two minutes before touching the system so you do not get hurt when it discharges. After that, unscrew the fastener that holds the front impact sensor to the lower end of the left or right radiator support vertical part. Disengage the electric connector from the sensor and then take the front impact sensor out of the engine compartment.