How to Service an Air Bag Sensor in the Side C-Pillar on 2010 Dodge Avenger?

First, take the negative battery cable out and let the system's capacitors discharge for two minutes before you touch the sensor to avoid injury. Remove the rear trim next and afterwards pull the screw that holds the side impact sensor to the C-pillar. Lift the sensor out of the car by taking out the connector and, lastly, lifting the sensor out of the C-pillar.

OEM 2010 Dodge Avenger Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Bag Sensor found

View related parts
2010 Dodge Avenger Air Bag Sensor, Rear Part Number: 68056162AA
$89.62 MSRP: $132.00
You Save: $42.38 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front, Side, B Pillar, and C Pillar Sensors.
- Position: Rear
- Replaces: 4896152AC
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.2 x 1.5 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68056162AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
- Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

2010 Dodge Avenger Air Bag Sensor Parts and Q&A

Q: How to Service an Air Bag Sensor in the Side C-Pillar on 2010 Dodge Avenger?
A: First, take the negative battery cable out and let the system's capacitors discharge for two minutes before you touch the sensor to avoid injury. Remove the rear trim next and afterwards pull the screw that holds the side impact sensor to the C-pillar. Lift the sensor out of the car by taking out the connector and, lastly, lifting the sensor out of the C-pillar.