How to Install the A/C Switch and Initiate Actuator Calibration on 2009 Dodge Challenger?

To install the A/C-heater control, fix it in the instrument panel center bezel with 4 screws at 2 Nm (17 in. lbs.). After installation, when the ignition is made, the control will automatically calibrate. If previously done, manual calibration using a scan tool is required. Reconnect the negative battery cable after this.

OEM 2009 Dodge Challenger A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Switch found

View related parts
2009 Dodge Challenger Heater Control Part Number: 55111904AE
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit; Control A/C And Heater
- Replaces: 55111904AD, 55111904AB, 55111904AC
- Item Weight: 1.30 Pounds
- Item Dimensions: 10.9 x 4.9 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111904AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2009 Dodge Challenger A/C Switch Parts and Q&A

Q: How to Install the A/C Switch and Initiate Actuator Calibration on 2009 Dodge Challenger?
A: To install the A/C-heater control, fix it in the instrument panel center bezel with 4 screws at 2 Nm (17 in. lbs.). After installation, when the ignition is made, the control will automatically calibrate. If previously done, manual calibration using a scan tool is required. Reconnect the negative battery cable after this.