How to Install a Blend Door Actuator on 2009 Dodge Challenger?

To install the blend door actuator, secure it to the driver side of the HVAC housing (align the splines if necessary). Tighten the screws to 2 Nm, connect the wire harness, install the instrument panel silencer, reconnect the battery, Actuator Calibration using a scan tool.

OEM 2009 Dodge Challenger Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
2009 Dodge Challenger Door Actuator Part Number: 68299450AA
$93.38 MSRP: $141.00
You Save: $47.62 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Floor Mode Door Actuator; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; Actuator; Actuator A/C And Heater
- Replaces: 68033337AA, 68238243AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.9 x 2.9 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68299450AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, Scat Pack, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, T/A, T/A 392, T/A 392 Widebody | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2009 Dodge Challenger Blend Door Actuator Parts and Q&A

Q: How to Install a Blend Door Actuator on 2009 Dodge Challenger?
A: To install the blend door actuator, secure it to the driver side of the HVAC housing (align the splines if necessary). Tighten the screws to 2 Nm, connect the wire harness, install the instrument panel silencer, reconnect the battery, Actuator Calibration using a scan tool.