How to Maintain a Front Wheel Speed Sensor on 2009 Dodge Challenger?

Before servicing the front wheel speed sensor, you should raise and support the vehicle on ramps. Following that, disconnect the clip attached to the sensor cable cord from the brake hose bracket. Release the sensor connector by pressing the retaining clip and then pulling the connector away from the rest of the wiring harness. The next step is to take out the sensor connector from the body wiring harness connector. Remove the screw that fastens the wheel speed sensor to the knuckle and draw the sensor out of its place. After that, take off the cable routing clip from the brake hose routing bracket.

OEM 2009 Dodge Challenger Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
2009 Dodge Challenger Vehicle Speed Sensor Part Number: 4799061AB
$42.22 MSRP: $60.70
You Save: $18.48 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Input Speed; Automatic Transmission Speed Sensor; Speedometer Sensor; Used for input and output in transmission speed sensing.
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4799061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Dodge Challenger Vehicle Speed Sensor Part Number: 52854001AA
$66.90 MSRP: $101.00
You Save: $34.10 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Output Speed; Automatic Transmission Speed Sensor; Output Sensor; Sensor Transmission Output Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.3 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52854001AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2009 Dodge Challenger Speed Sensor Parts and Q&A

Q: How to Maintain a Front Wheel Speed Sensor on 2009 Dodge Challenger?
A: Before servicing the front wheel speed sensor, you should raise and support the vehicle on ramps. Following that, disconnect the clip attached to the sensor cable cord from the brake hose bracket. Release the sensor connector by pressing the retaining clip and then pulling the connector away from the rest of the wiring harness. The next step is to take out the sensor connector from the body wiring harness connector. Remove the screw that fastens the wheel speed sensor to the knuckle and draw the sensor out of its place. After that, take off the cable routing clip from the brake hose routing bracket.