How to Remove and Replace Rear Brake Pads on 2009 Dodge Challenger?

To take out and place the rear brake pads (except on the SRT8), support and raise the car. Remove all the wheel mounting nuts and then get rid of the tire and wheel combination. Occasionally, you may have to slightly pull the caliper piston out to ensure the shoes and rotor don't catch when taking the caliper off the knuckle; this can be done by pulling the caliper rearward and using the guide pins, but don't push on the piston, as it could cause damage. Then, with the stationary guide pin, remove the upper caliper guide pin bolt. To see the brake pads, tilt the caliper down while being sure not to pull the brake hose all the way down. Get rid of the inboard and outboard brake pads from the caliper adapter. Should you encounter any problems with the adapter, take out the anti-rattle clips from both abutments.

OEM 2009 Dodge Challenger Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Pads found

View related parts
2009 Dodge Challenger Brake Pads, Rear Part Number: 5174327AC
$276.45 MSRP: $412.00
You Save: $135.55 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Rear Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Hardware Kit; Rear Pads; Pad Kit Rear Disc Brake; Disc Brake Pad Set
- Position: Rear
- Replaces: 5174327AA, 5174327AB
- Item Weight: 3.90 Pounds
- Item Dimensions: 1.9 x 5.5 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174327AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2009 Dodge Challenger Brake Pads, Front Part Number: 5174311AC
$344.65 MSRP: $508.00
You Save: $163.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake Contains 4 Pads; Pad Kit Front Disc Brake
- Position: Front
- Replaces: 5174311AA, 5174311AB
- Item Weight: 6.00 Pounds
- Item Dimensions: 1.9 x 5.9 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174311AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Dodge Challenger Brake Pads, Rear Part Number: 5142560AC
$64.93 MSRP: $101.00
You Save: $36.07 (36%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Rear Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Hardware Kit; Rear Pads
- Position: Rear
- Replaces: 5142560AB, 5142560AA
- Item Weight: 2.90 Pounds
- Item Dimensions: 9.1 x 4.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142560AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Hellcat, SRT Hellcat Redeye, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2009 Dodge Challenger Brake Pads, Front Part Number: 5174001AD
$86.54 MSRP: $134.00
You Save: $47.46 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Replaces: 5174001AA, 5174001AB, 5142555AA, 5174001AC
- Item Weight: 4.60 Pounds
- Item Dimensions: 8.9 x 0.4 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174001AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Hellcat, SRT Hellcat Redeye, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2009 Dodge Challenger Brake Pads, Rear Part Number: 5142561AC
$65.35 MSRP: $164.00
You Save: $98.65 (61%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Rear Disc Brake; Disc Brake Pad Set, Rear; Rear Pads
- Position: Rear
- Replaces: 5142561AA, 5142561AB
- Item Weight: 3.10 Pounds
- Item Dimensions: 5.3 x 4.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142561AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Hellcat, SRT Hellcat Redeye, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2009 Dodge Challenger Pad Kit - Front Disc Brake Part Number: 68147681AD
$210.74 MSRP: $310.00
You Save: $99.26 (33%)
Product Specifications
- Other Name: PAD KIT-FRONT DISC BRAKE
- SKU: 68147681AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus, Scat Pack, T/A 392 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2009 Dodge Challenger Brake Pad Parts and Q&A

Q: How to Remove and Replace Rear Brake Pads on 2009 Dodge Challenger?
A: To take out and place the rear brake pads (except on the SRT8), support and raise the car. Remove all the wheel mounting nuts and then get rid of the tire and wheel combination. Occasionally, you may have to slightly pull the caliper piston out to ensure the shoes and rotor don't catch when taking the caliper off the knuckle; this can be done by pulling the caliper rearward and using the guide pins, but don't push on the piston, as it could cause damage. Then, with the stationary guide pin, remove the upper caliper guide pin bolt. To see the brake pads, tilt the caliper down while being sure not to pull the brake hose all the way down. Get rid of the inboard and outboard brake pads from the caliper adapter. Should you encounter any problems with the adapter, take out the anti-rattle clips from both abutments.