How to Service and Repair a Yaw Sensor on 2009 Dodge Charger?

In the process of repairing the yaw rate sensor, begin by disconnection of the negative battery cable. The next step is to disconnect the sensor harness of the floor console and pull it out. Then remove the nuts holding sensor to the floor pan tunnel and then lastly remove the dynamics sensor out of the vehicle.

OEM 2009 Dodge Charger Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Yaw Sensors found

View related parts
2009 Dodge Charger Yaw Rate Sensor Part Number: 56029427AA
$445.41 MSRP: $649.00
You Save: $203.59 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate.
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.1 x 4.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029427AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Charger Yaw Rate Sensor Part Number: 56029483AA
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Lateral Accelerometer Sensor; Electronic Stability Module.
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 4.0 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029483AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2009 Dodge Charger Yaw Sensor Parts and Q&A

Q: How to Service and Repair a Yaw Sensor on 2009 Dodge Charger?
A: In the process of repairing the yaw rate sensor, begin by disconnection of the negative battery cable. The next step is to disconnect the sensor harness of the floor console and pull it out. Then remove the nuts holding sensor to the floor pan tunnel and then lastly remove the dynamics sensor out of the vehicle.