How to Service and Repair a Yaw Sensor on Dodge Charger?

First, unhook and put label on the negative cable of the battery before working on the yaw rate sensor. Following that, pull out the center floor console. After that, remove the connector from the sensor wiring harness. Afterward, take off the nuts that hold the sensor onto the floor pan tunnel. Take away the dynamics sensor at the end of your test.

How to Install and Verify a Yaw Sensor on Dodge Charger?

To install the sensor, lay it across the studs that are attached to the floor pan tunnel and secure it by hand tightening the mounting nuts at 12 Nm (110 in. lbs.) force. After connecting the wiring harness connector to the module, fix the floor console into position. Afterwards, attach the battery's ground wire to the correct battery post. After that, carry out a Verification Test to find and clear any issues.

OEM Dodge Charger Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Yaw Sensors found

View related parts
Dodge Charger Yaw Rate Sensor Part Number: 56029427AA
$445.41 MSRP: $649.00
You Save: $203.59 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Charger | R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Yaw Rate Sensor Part Number: 56029549AD
$374.42 MSRP: $545.00
You Save: $170.58 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; Suspension Yaw Sensor; Yaw Sensor; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Replaces: 56029549AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Yaw Rate Sensor Part Number: 56029483AA
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Lateral Accelerometer Sensor; Electronic Stability Module.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Charger Yaw Sensor

Choose OEM Yaw Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Yaw Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Charger Yaw Sensor Parts and Q&A

Yaw Rate Sensor
56029427AA
Q: How to Service and Repair a Yaw Sensor on Dodge Charger?
A:
First, unhook and put label on the negative cable of the battery before working on the yaw rate sensor. Following that, pull out the center floor console. After that, remove the connector from the sensor wiring harness. Afterward, take off the nuts that hold the sensor onto the floor pan tunnel. Take away the dynamics sensor at the end of your test.
Yaw Rate Sensor
56029483AA
Q: How to Install and Verify a Yaw Sensor on Dodge Charger?
A:
To install the sensor, lay it across the studs that are attached to the floor pan tunnel and secure it by hand tightening the mounting nuts at 12 Nm (110 in. lbs.) force. After connecting the wiring harness connector to the module, fix the floor console into position. Afterwards, attach the battery's ground wire to the correct battery post. After that, carry out a Verification Test to find and clear any issues.