Other Name: Absorber - Suspension; Rear Shock Absorber; Strut and Coil Spring Assembly Kit; Complete Strut.; Shock; Shock Absorber Suspension Rear
Position: Rear
Item Weight: 5.40 Pounds
Item Dimensions: 22.8 x 6.2 x 4.5 inches
Condition: New
Fitment Type: Direct Replacement
Require Quantity: 2
SKU: 68020856AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Dakota Submodels:
Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
2009 Dodge Dakota Shock Absorber Parts and Q&A
Q: How to Detach a Front Shock Absorber on 2009 Dodge Dakota?
A: Before removing the front shock absorber, remove the upper shock nuts. After that, make sure the car is stable and then remove the tire and wheel set. Following this, remove the bolts of the disc brake caliper and the routing clip for the wheel speed sensor. Take out the upper ball joint nut and use special tool 8677 to separate the ball joint from the knuckle. After propping up the lower control arm nearest the fender, release the lower stabilizer link nut and pull it free from the control arm. When you're done, remove the lower shock bolt and nut and then remove the shock itself.